eric
/
mysticbbs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
mysticbbs/mdl/m_protocol_zmodem.pas

1758 lines
42 KiB
ObjectPascal
Raw Blame History

Unit m_Protocol_Zmodem;
{$I M_OPS.PAS}
{.$DEFINE ZDEBUG}
Interface
// Ported from ZMODEM.C
Uses
DOS,
m_CRC,
m_DateTime,
m_FileIO,
m_Strings,
m_Input,
m_io_Base,
m_Protocol_Base,
m_Protocol_Queue;
Const
ZBufSize = 1024; // 1024 only maybe 8k ZEDZAP someday
ZAttnLen = 32;
RxTimeOut : Word = 500;
Type
ZHdrType = Array[0..3] of Byte;
ZBufType = Array[0..ZBUFSIZE - 1] of Byte;
TProtocolZmodem = Class(TProtocolBase)
UseCRC32 : Boolean;
EscapeAll : Boolean;
LastSent : Byte;
Attn : String[ZAttnLen];
TxHdr : ZHdrType;
TxBuf : ZBufType;
RxBuf : ZBufType;
RxFrameIdx : SmallInt;
RxType : Byte;
TxPos : LongInt;
RxPos : LongInt;
RxHdr : ZHdrType;
RxBufLen : SmallInt;
WrkFile : File;
RxBytes : LongInt;
RxCount : LongInt;
Constructor Create (Var C: TIOBase; Var Q: TProtocolQueue); Override;
Destructor Destroy; Override;
Procedure QueueReceive; Override;
Procedure QueueSend; Override;
Function ZInitReceiver : SmallInt;
Function ZGetByte : SmallInt;
Function ZDLRead : SmallInt;
Function ZGetHex : SmallInt;
Function ZSendFile : SmallInt;
Function ZInitSender : SmallInt;
Function ZReceiveFile : SmallInt;
Procedure ZPutHex (B: Byte);
Procedure ZPutLong (Pos: LongInt);
Procedure ZSendHexHeader (FrameType: Byte);
Function ZGetHeader (Var Hdr: ZHdrType) : SmallInt;
Function ZReceiveHexHeader (Var Hdr: ZHdrType) : SmallInt;
Function ZReceiveBinaryHeader (Var Hdr: ZHdrType) : SmallInt;
Function ZReceiveBinaryHeader32 (Var Hdr: ZHdrType) : SmallInt;
Function ZGetLong (Var Hdr: ZHdrType) : LongInt;
Procedure ZSendBinaryHeader (FrameType: Byte);
Procedure SendEscaped (B: SmallInt);
Procedure ZSendData (BufSize : SmallInt; FrameEnd : Byte);
Function ZReceiveData (Var Buf: ZBufType; Len: SmallInt): SmallInt;
Procedure ZAckBiBi;
Procedure ZEndSender;
Procedure DoAbortSequence;
End;
Implementation
Const
CANBRK = 4;
EscAll = $0040;
ZCRC = 13;
ZABORT = 7;
ZRQINIT = 0;
ZPAD = 42;
ZDLE = 24;
ZHEX = 66;
ZACK = 3;
ZFIN = 8;
ZERROR = -1;
ZTIMEOUT = -2;
RCDO = -3;
ZBIN32 = 67;
XON = 17;
XOFF = 19;
CAN = 24;
ZCAN = 16;
DLE = 16;
ZBIN = 65;
GOTCAN = 272;
ZCRCE = 104;
ZCRCG = 105;
ZCRCQ = 106;
ZCRCW = 107;
GOTOR = 256;
ZRUB0 = 108;
ZRUB1 = 109;
ZP0 = 0;
ZP1 = 1;
ZP2 = 2;
ZP3 = 3;
CANFDX = 1;
CANOVIO = 2;
CANBREAK = 4;
CANFC32 = 32;
ZCHALLENGE = 14;
ZRINIT = 1;
ZF0 = 3;
ZOK = 0;
ZSKIP = 5;
ZCRESUM = 3;
ZDATA = 10;
ZFILE = 4;
ZRPOS = 9;
ZEOF = 11;
ZCOMMAND = 18;
ZNAK = 6;
GOTCRCE = 360;
GOTCRCG = 361;
GOTCRCQ = 362;
GOTCRCW = 363;
ZSINIT = 2;
ZFREECNT = 17;
ZCOMPL = 15;
DleHi = Dle OR $80;
XonHi = Xon OR $80;
XoffHi = Xoff OR $80;
CancelStr : String = #24#24#24#24#24#24#24#24#8#8#8#8#8#8#8#8;
{$IFDEF ZDEBUG}
Function HeaderType (B: SmallInt) : String;
Begin
Case B of
ZERROR : Result := 'ZERROR';
RCDO : Result := 'RCDO';
ZTIMEOUT: Result := 'ZTIMEOUT';
ZBIN : Result := 'ZBIN';
ZBIN32 : Result := 'ZBIN32';
ZHEX : Result := 'ZHEX';
CAN : Result := 'CAN';
ZRQINIT : Result := 'ZRQINIT';
ZEOF : Result := 'ZEOF';
ZFILE : Result := 'ZFILE';
ZRPOS : Result := 'ZRPOS';
ZRINIT : Result := 'ZRINIT';
ZSINIT : Result := 'ZSINIT';
ZFREECNT: Result := 'ZFREECNT';
ZCOMMAND: Result := 'ZCOMMAND';
ZCOMPL : Result := 'ZCOMPL';
ZFIN : Result := 'ZFIN';
ZCAN : Result := 'ZCAN';
ZDATA : Result := 'ZDATA';
GOTCRCE : Result := 'GOTCRCE';
GOTCRCG : Result := 'GOTCRCG';
GOTCRCQ : Result := 'GOTCRCQ';
GOTCRCW : Result := 'GOTCRCW';
ZCRC : Result := 'ZCRC';
Else
Result := 'UNKNOWN:' + strI2S(Ord(B));
End;
End;
{$ENDIF}
{$IFDEF ZDEBUG}
Procedure ZLOG (Str: String);
Var
T : Text;
Begin
Assign (T, 'zlog.txt');
{$I-} Append(T); {$I+}
If IoResult <> 0 Then ReWrite(T);
WriteLn(T, Str);
Close(T);
End;
{$ENDIF}
Constructor TProtocolZmodem.Create (Var C: TIOBase; Var Q: TProtocolQueue);
Begin
Inherited Create (C, Q);
Status.Protocol := 'Zmodem';
LastSent := 0;
EscapeAll := True;
Attn := '';
End;
Destructor TProtocolZmodem.Destroy;
Begin
Inherited Destroy;
End;
Procedure TProtocolZmodem.ZPutLong (Pos : LongInt);
Begin
TxHdr[ZP0] := Byte(Pos);
TxHdr[ZP1] := Byte(Pos SHR 8);
TxHdr[ZP2] := Byte(Pos SHR 16);
TxHdr[ZP3] := Byte(Pos SHR 24);
End;
Procedure TProtocolZmodem.ZPutHex (B: Byte);
Const
Digits : Array[0..15] of Char = '0123456789abcdef';
Begin
Client.BufWriteChar (Digits[B SHR 4]);
Client.BufWriteChar (Digits[B AND $0F]);
End;
Procedure TProtocolZmodem.ZSendHexHeader (FrameType: Byte);
Var
CRC : SmallInt;
Count : Byte;
Begin
Client.BufWriteChar (Char(ZPAD));
Client.BufWriteChar (Char(ZPAD));
Client.BufWriteChar (Char(ZDLE));
Client.BufWriteChar (Char(ZHEX));
ZPutHex (FrameType);
CRC := Crc16(FrameType, 0);
For Count := 0 to 3 Do Begin
ZPutHex (TxHdr[Count]);
CRC := Crc16(TxHdr[Count], CRC);
End;
CRC := Crc16(0, CRC);
CRC := Crc16(0, CRC);
ZPutHex (Lo(SmallInt(CRC SHR 8)));
ZPutHex (Lo(CRC));
Client.BufWriteChar (#13);
Client.BufWriteChar (#10);
If (FrameType <> ZFIN) And (FrameType <> ZACK) Then
Client.BufWriteChar (Char(XON));
Client.BufFlush;
End;
Function TProtocolZmodem.ZGetByte : SmallInt;
Begin
While Connected Do Begin
Result := ReadByteTimeOut(RxTimeOut);
If Result < 0 Then Begin
Result := ZTIMEOUT;
Exit;
End;
Result := Result AND $007F;
Case Result of
XON,
XOFF : Continue;
Else
Exit;
End;
End;
Result := RCDO;
End;
Function TProtocolZmodem.ZDLRead : SmallInt;
Begin
Result := ReadByteTimeOut(RxTimeOut);
If Result <> ZDLE Then Exit;
Result := ReadByteTimeOut(RxTimeOut);
If Result = CAN Then Begin
Result := ReadByteTimeOut(RxTimeOut);
If Result = CAN Then Begin
Result := ReadByteTimeOut(RxTimeOut);
If Result = CAN Then
Result := ReadByteTimeOut(RxTimeOut);
End
End;
Case Result of
CAN : Result := GOTCAN;
ZCRCE,
ZCRCG,
ZCRCQ,
ZCRCW : Result := (Result OR 256);
ZRUB0 : Result := $007F;
ZRUB1 : Result := $00FF;
Else
If ((Result AND $60) = $40) Then
Result := Result XOR $40
Else Begin
Result := ZERROR;
{$IFDEF ZDEBUG} ZLog('ZDLRead -> Got ZERROR'); {$ENDIF}
End;
End;
End;
(*
Function TProtocolZmodem.ZDLRead : SmallInt;
Begin
Result := ReadByteTimeOut(RxTimeOut);
If Result <> ZDLE Then Exit;
Result := ReadByteTimeOut(RxTimeOut);
If Result = CAN Then Begin
Result := ReadByteTimeOut(RxTimeOut);
If Result = CAN Then Begin
Result := ReadByteTimeOut(RxTimeOut);
If Result = CAN Then
Result := ReadByteTimeOut(RxTimeOut);
End
End;
Case Result of
CAN : Result := GOTCAN;
ZCRCE,
ZCRCG,
ZCRCQ,
ZCRCW : Result := (Result OR 256);
ZRUB0 : Result := $007F;
ZRUB1 : Result := $00FF;
Else
If Result > 0 Then
If ((Result AND $60) = $40) Then
Result := Result XOR $40
Else
Result := ZERROR;
End;
End;
*)
Function TProtocolZmodem.ZReceiveBinaryHeader (Var Hdr: ZHdrType) : SmallInt;
Var
C : SmallInt;
N : SmallInt;
CRC : Word;
Begin
C := ZDLRead;
If C < 0 Then Begin
ZReceiveBinaryHeader := C;
Exit;
End;
RxType := C;
CRC := Crc16(RxType, 0);
For N := 0 To 3 Do Begin
C := ZDLRead;
If Hi(C) <> 0 Then Begin
ZReceiveBinaryHeader := C;
Exit;
End;
Hdr[N] := Lo(C);
CRC := Crc16(Lo(C), CRC);
End;
C := ZDLRead;
If Hi(C) <> 0 Then Begin
ZReceiveBinaryHeader := C;
Exit;
End;
CRC := Crc16(Lo(C), CRC);
C := ZDLRead;
If Hi(C) <> 0 Then Begin
ZReceiveBinaryHeader := C;
Exit;
End;
CRC := Crc16(Lo(C), CRC);
If CRC <> 0 Then Begin
{$IFDEF ZDEBUG} ZLog('ZReceiveBinaryHeader -> CRC error'); {$ENDIF}
ZReceiveBinaryHeader := ZERROR;
Exit;
End;
ZReceiveBinaryHeader := RxType;
End;
Function TProtocolZmodem.ZReceiveBinaryHeader32 (Var Hdr: ZHdrType) : SmallInt;
Var
C : SmallInt;
Loop : Byte;
CRC : LongInt;
Begin
C := ZDLRead;
If C < 0 Then Begin
ZReceiveBinaryHeader32 := C;
Exit;
End;
RxType := C;
CRC := Crc32(RxType, LongInt($FFFFFFFF));
For Loop := 0 To 3 Do Begin
C := ZDLRead;
If Hi(C) <> 0 Then Begin
ZReceiveBinaryHeader32 := C;
Exit;
End;
Hdr[Loop] := Lo(C);
CRC := Crc32(Lo(C), CRC);
End;
For Loop := 0 To 3 Do Begin
C := ZDLRead;
If Hi(C) <> 0 Then Begin
ZReceiveBinaryHeader32 := C;
Exit;
End;
CRC := Crc32(Lo(C), CRC);
End;
If CRC <> LongInt($DEBB20E3) Then Begin
{$IFDEF ZDEBUG} ZLog('ZReceieveBinaryHeader32 -> CRC error'); {$ENDIF}
ZReceiveBinaryHeader32 := ZERROR;
Exit;
End;
ZReceiveBinaryHeader32 := RxType;
End;
Procedure TProtocolZmodem.SendEscaped (B: SmallInt);
Begin
Case B of
DLE,
DLEHI,
XON,
XONHI,
XOFF,
XOFFHI,
ZDLE : Begin
Client.BufWriteChar(Char(ZDLE));
LastSent := B XOR $40;
End;
13,
13 OR $80 : If {EscapeAll And} (LastSent AND $7F = Ord('@')) Then Begin
Client.BufWriteChar(Char(ZDLE));
LastSent := B XOR $40;
End Else
LastSent := B;
255 : Begin
Client.BufWriteChar(Char(ZDLE));
LastSent := ZRUB1;
End;
Else
If {(EscapeAll) and} ((B AND $60) = 0) Then Begin
Client.BufWriteChar(Char(ZDLE));
LastSent := B XOR $40;
End Else
LastSent := B;
End;
Client.BufWriteChar(Char(LastSent));
End;
Procedure TProtocolZmodem.ZSendBinaryHeader (FrameType : Byte);
Var
ulCRC : LongInt;
CRC : SmallInt;
Count : SmallInt;
Begin
Client.BufWriteChar(Char(ZPAD));
Client.BufWriteChar(Char(ZDLE));
If UseCRC32 Then Begin
Client.BufWriteChar(Char(ZBIN32));
SendEscaped (FrameType);
ulCRC := Crc32(FrameType, LongInt($FFFFFFFF));
For Count := 0 to 3 Do Begin
SendEscaped (TxHdr[Count]);
ulCRC := Crc32 (TxHdr[Count], ulCRC);
End;
ulCRC := Not ulCRC;
For Count := 0 to 3 Do Begin
SendEscaped (Byte(ulCRC));
ulCRC := ulCRC SHR 8;
End;
End Else Begin
Client.BufWriteChar(Char(ZBIN));
SendEscaped (FrameType);
CRC := Crc16(FrameType, 0);
For Count := 0 to 3 Do Begin
SendEscaped (TxHdr[Count]);
CRC := Crc16 (TxHdr[Count], CRC);
End;
CRC := Crc16(0, CRC);
CRC := Crc16(0, CRC);
SendEscaped (Lo(SmallInt(CRC SHR 8)));
SendEscaped (Lo(CRC));
End;
Client.BufFlush;
If FrameType <> ZDATA Then WaitMS(250); { do we need this? }
End;
Function TProtocolZmodem.ZGetHex : SmallInt;
Var
C : SmallInt;
N : SmallInt;
Begin
C := ZGetByte;
If C < 0 Then Begin
ZGetHex := C;
Exit;
End;
N := C - 48;
If N > 9 Then
N := N - 39;
If (N AND $FFF0) <> 0 Then Begin
ZGetHex := ZERROR;
Exit;
End;
C := ZGetByte;
If C < 0 Then Begin
ZGetHex := C;
Exit;
End;
C := C - 48;
If C > 9 Then
C := C - 39;
If (C AND $FFF0) <> 0 Then Begin
ZGetHex := ZERROR;
Exit;
End;
C := C + (N SHL 4);
ZGetHex := C;
End;
Function TProtocolZmodem.ZGetLong (Var Hdr: ZHdrType) : LongInt;
Begin
Result := Hdr[ZP3];
Result := (Result SHL 8) OR Hdr[ZP2];
Result := (Result SHL 8) OR Hdr[ZP1];
Result := (Result SHL 8) OR Hdr[ZP0];
End;
Function TProtocolZmodem.ZReceiveHexHeader (Var Hdr : ZHdrType) : SmallInt;
Var
N : SmallInt;
C : SmallInt;
CRC : Word;
Begin
C := ZGetHex;
If C < 0 Then Begin
ZReceiveHexHeader := C;
Exit;
End;
RxType := C;
CRC := Crc16(RxType, 0);
For N := 0 To 3 Do Begin
C := ZGetHex;
If C < 0 Then Begin
ZReceiveHexHeader := C;
Exit;
End;
Hdr[N] := Lo(C);
CRC := Crc16(Lo(C), CRC);
End;
C := ZGetHex;
If C < 0 Then Begin
ZReceiveHexHeader := C;
Exit;
End;
CRC := Crc16(Lo(C), CRC);
C := ZGetHex;
If C < 0 Then Begin
ZReceiveHexHeader := C;
Exit;
End;
CRC := Crc16(Lo(C), CRC);
If (CRC <> 0) Then Begin
{$IFDEF ZDEBUG} ZLog('ZReceieveHexHeader -> CRC error'); {$ENDIF}
ZReceiveHexHeader := ZERROR;
Exit;
End;
If ReadByteTimeOut(20) = 13 Then
C := ReadByteTimeOut(20);
ZReceiveHexHeader := RxType;
End;
Function TProtocolZmodem.ZGetHeader (Var Hdr: ZHdrType) : SmallInt;
Label
Again,
Again2,
Splat,
Finished;
Var
C : SmallInt;
SyncTries : SmallInt;
CanCount : SmallInt;
Begin
SyncTries := 32;
CanCount := 5;
RxFrameIdx := 0;
RxType := 0;
Again:
C := ZGetByte;
Case C of
ZPAD : Goto Splat;
RCDO,
ZTIMEOUT: Goto Finished;
CAN : Begin
Dec (CanCount);
If CanCount <= 0 Then Begin
C := ZCAN;
Goto Finished;
End;
End;
Else
Again2:
Dec (SyncTries);
If SyncTries = 0 Then Begin
ZGetHeader := ZERROR;
Exit;
End;
If C <> CAN Then
CanCount := 5;
Goto Again;
End;
CanCount := 5;
Splat:
C := ZGetByte;
Case C of
ZPAD : Goto Splat;
RCDO,
ZTIMEOUT: Goto Finished;
ZDLE : ;
Else
Goto Again2;
End;
C := ZGetByte;
Case C of
RCDO,
ZTIMEOUT: Goto Finished;
ZBIN : Begin
RxFrameIdx := ZBIN;
C := ZReceiveBinaryHeader(Hdr);
End;
ZBIN32 : Begin
RxFrameIdx := ZBIN32;
C := ZReceiveBinaryHeader32(Hdr);
End;
ZHEX : Begin
RxFrameIdx := ZHEX;
C := ZReceiveHexHeader(Hdr);
End;
CAN : Begin
Dec (CanCount);
If CanCount <= 0 Then Begin
C := ZCAN;
Goto Finished;
End;
Goto Again2;
End;
Else
Goto Again2;
End;
RxPos := ZGetLong(Hdr);
Finished:
If C = GOTCAN Then C := ZCAN;
{$IFDEF ZDEBUG} ZLog('ZGetHeader -> Result ' + HeaderType(C)); {$ENDIF}
Result := C;
End;
Function TProtocolZmodem.ZInitReceiver : SmallInt;
Var
I : SmallInt;
Begin
ZPutLong (0);
ZSendHexHeader (ZRQINIT);
{$IFDEF ZDEBUG} ZLog('ZInitReceiver -> begin ZRQINIT want ZRINIT'); {$ENDIF}
For I := 0 to 10 Do Begin
If AbortTransfer Then Break;
Case ZGetHeader(RxHdr) of
ZCHALLENGE: Begin
{$IFDEF ZDEBUG} ZLog('ZInitReceiver -> Got ZCHALLENGE'); {$ENDIF}
ZPutLong (RxPos);
ZSendHexHeader (ZACK);
End;
ZCOMMAND : Begin
{$IFDEF ZDEBUG} ZLog('ZInitReceiver -> Got ZCOMMAND'); {$ENDIF}
ZPutLong (0);
ZSendHexHeader (ZRQINIT);
End;
ZRINIT : Begin
RxBufLen := (Word(RxHdr[ZP1]) SHL 8) OR RxHdr[ZP0];
UseCrc32 := (RxHdr[ZF0] AND CANFC32) <> 0;
EscapeAll := (RxHdr[ZF0] AND ESCALL) = ESCALL;
ZInitReceiver := ZOK;
{$IFDEF ZDEBUG} ZLog('ZInitReceiver -> ZRINIT'); {$ENDIF}
{$IFDEF ZDEBUG} ZLog('ZInitReceiver -> CRC32:' + strI2S(Ord(UseCrc32))); {$ENDIF}
{$IFDEF ZDEBUG} ZLog('ZInitReceiver -> EscapeAll:' + strI2S(Ord(EscapeAll))); {$ENDIF}
{$IFDEF ZDEBUG} ZLog('ZInitReceiver -> BlockSize:' + strI2S(RxBufLen)); {$ENDIF}
Exit;
End;
RCDO,
ZCAN,
ZTIMEOUT : Begin
{$IFDEF ZDEBUG} ZLog('ZInitReceiver -> Got TIMEOUT/CAN'); {$ENDIF}
ZInitReceiver := ZERROR;
Exit;
End;
ZRQINIT : {$IFDEF ZDEBUG} ZLog('ZInitReceiver -> Got ZRQINIT response') {$ENDIF};
Else
{$IFDEF ZDEBUG} ZLog('ZInitReceiver -> Unknown sending ZNAK'); {$ENDIF}
ZSendHexHeader (ZNAK);
End;
End;
Result := ZERROR;
End;
Procedure TProtocolZmodem.ZSendData (BufSize: SmallInt; FrameEnd: Byte);
Var
ulCRC : LongInt;
CRC : SmallInt;
Count : LongInt;
Begin
If UseCRC32 Then Begin
ulCRC := LongInt($FFFFFFFF);
For Count := 0 to BufSize - 1 Do Begin
SendEscaped (TxBuf[Count]);
ulCRC := Crc32(TxBuf[Count], ulCRC);
End;
ulCRC := Crc32(FrameEnd, ulCRC);
ulCRC := Not ulCRC;
Client.BufWriteChar(Char(ZDLE));
Client.BufWriteChar(Char(FrameEnd));
For Count := 0 to 3 Do Begin
SendEscaped (Byte(ulCRC));
ulCRC := ulCRC SHR 8;
End;
End Else Begin
CRC := 0;
For Count := 0 to BufSize - 1 Do Begin
SendEscaped (TxBuf[Count]);
CRC := Crc16(TxBuf[Count], CRC);
End;
CRC := Crc16(FrameEnd, CRC);
Client.BufWriteChar(Char(ZDLE));
Client.BufWriteChar(Char(FrameEnd));
CRC := Crc16(0, CRC);
CRC := Crc16(0, CRC);
SendEscaped (Lo(SmallInt(CRC SHR 8)));
SendEscaped (Lo(CRC));
End;
If FrameEnd = ZCRCW Then Begin
Client.BufWriteChar(Char(XON));
// WaitMS(250);
End;
Client.BufFlush;
End;
Function TProtocolZmodem.ZSendFile : SmallInt;
Label
Start;
Var
FTime : LongInt;
TmpStr : String;
C : SmallInt;
Res : LongInt;
FileDone : Boolean;
GoodBlks : Word;
GoodNeeded : Word;
Begin
{$IFDEF ZDEBUG} ZLog(''); {$ENDIF}
{$IFDEF ZDEBUG} ZLog('ZSendFile -> begin'); {$ENDIF}
{$IFDEF ZDEBUG} ZLog('ZSendFile -> file:' + Queue.QData[Queue.QPos].FileName); {$ENDIF}
Result := ZERROR;
Assign (WrkFile, Queue.QData[Queue.QPos]^.FilePath + Queue.QData[Queue.QPos]^.FileName);
If Not ioReset (WrkFile, 1, fmReadWrite + fmDenyNone) Then Exit;
GetFTime (WrkFile, FTime);
Status.FileName := Queue.QData[Queue.QPos]^.FileName;
Status.FilePath := Queue.QData[Queue.QPos]^.FilePath;
Status.FileSize := Queue.QData[Queue.QPos]^.FileSize;
Status.Position := 0;
Status.StartPos := 0;
Status.StartTime := TimerSeconds;
StatusUpdate(False, False);
Repeat
If AbortTransfer Then Begin
Close (WrkFile);
Exit;
End;
FillChar (TxHdr, SizeOf(TxHdr), 0);
FillChar (TxBuf, SizeOf(TxBuf), 0);
TxHdr[ZF0] := ZCRESUM;
TmpStr := Status.FileName + #0 + strI2S(Status.FileSize);
Move (TmpStr[1], TxBuf[0], Length(TmpStr));
ZSendBinaryHeader (ZFILE);
ZSendData (Length(TmpStr), ZCRCW);
{$IFDEF ZDEBUG} ZLog('ZSendFile -> Sending ZFILE want ZRPOS'); {$ENDIF}
WaitMS(500); // Delay for older terminal programs apparently
Repeat
C := ZGetHeader(RxHdr);
{$IFDEF ZDEBUG} ZLog('ZSendFile -> Handshake header ' + HeaderType(C)); {$ENDIF}
Case C of
ZRINIT : ;
RCDO,
ZCAN,
ZABORT,
ZFIN,
ZTIMEOUT : Begin
Close (WrkFile);
Exit;
End;
ZSKIP : Begin
Close (WrkFile);
ZSendFile := ZSKIP;
Exit;
End;
ZCRC : Begin
{$IFDEF ZDEBUG} ZLog('ZSendFile -> Sending File CRC response'); {$ENDIF}
ZPutLong(FileCRC32(Status.FilePath + Status.FileName));
ZSendHexHeader(ZCRC);
RxPos := 0;
// SYNCTERM expects ZDATA after a ZCRC i am not sure
// this is correct because how do we know the ZPOS from
// receiver if it works this way? zmodem doc isnt very
// clear on this. Lets try it...
Goto Start; //Continue;
End;
(* is SYNCTERM really asking for the FREENCNT here????? WTF
ZFREECNT: Begin
ZPutLong (LongInt($FFFFFFFF));
ZSendHexHeader (ZACK);
Continue;
End;
*)
ZRPOS : Goto Start;
End;
Until (C <> ZRINIT);
Until False;
Start:
{$IFDEF ZDEBUG} ZLog('ZSendFile -> Start transfer at ' + strI2S(RxPos)); {$ENDIF}
Seek (WrkFile, RxPos);
TxPos := RxPos;
FileDone := False;
GoodBlks := 0;
GoodNeeded := 0;
RxBufLen := ZBufSize;
Status.Position := RxPos;
Status.BlockSize := RxBufLen;
StatusUpdate(False, False);
If TxPos < Status.FileSize Then Begin
ZPutLong (TxPos);
ZSendBinaryHeader (ZDATA);
End;
StatusTimer := TimerSet(StatusCheck);
While Not EndTransfer Do Begin
If Not FileDone Then Begin
ioBlockRead (WrkFile, TxBuf, RxBufLen, Res);
If Res > 0 Then Begin
If Res < RxBufLen Then
ZSendData (Res, ZCRCE)
Else
ZSendData (Res, ZCRCG);
Inc (TxPos, Res);
Status.Position := TxPos;
Status.BlockSize := Res;
If TimerUp(StatusTimer) Then Begin
If AbortTransfer Then Break;
StatusUpdate(False, False);
StatusTimer := TimerSet(StatusCheck);
End;
{$IFDEF ZDEBUG} ZLog('ZSendFile -> Sent ZDATA block position now: ' + strI2S(TxPos)); {$ENDIF}
End Else Begin
{$IFDEF ZDEBUG} ZLog('ZSendFile -> Sending ZEOF want ZRINIT'); {$ENDIF}
FileDone := True;
ZPutLong (TxPos);
ZSendBinaryHeader (ZEOF);
StatusUpdate(False, False);
End;
End;
Inc (GoodBlks);
If (RxBufLen < ZBUFSIZE) And (GoodBlks > GoodNeeded) Then Begin
If ((RxBufLen SHL 1) < ZBUFSIZE) Then
RxBufLen := RxBufLen SHL 1
Else
RxBufLen := ZBUFSIZE;
GoodBlks := 0;
End;
While Client.DataWaiting And Not AbortTransfer Do Begin
{$IFDEF ZDEBUG} ZLog('ZSendFile -> Might have packet response, checking'); {$ENDIF}
C := ReadByteTimeOut(200);
If (C = CAN) or (C = ZPAD) Then Begin
C := ZGetHeader(RxHdr);
{$IFDEF ZDEBUG} ZLog('ZSendFile -> Got packet response ' + HeaderType(C)); {$ENDIF}
Case C of
ZACK : Continue;
ZRINIT : Begin
Close (WrkFile);
Result := ZOK;
Exit;
End;
ZRPOS : Begin
TxPos := RxPos;
FileDone := False;
ioSeek (WrkFile, TxPos);
{$IFDEF ZDEBUG} ZLog('ZSendFile -> Got ZRPOS Sending ZDATA position: ' + strI2S(TxPos)); {$ENDIF}
Client.PurgeInputData;
Client.PurgeOutputData;
If TxPos < Status.FileSize Then Begin
ZPutLong (TxPos);
ZSendBinaryHeader (ZDATA);
End;
If RxPos > 0 Then Begin
If (RxBufLen SHR 2) > 64 Then
RxBufLen := RxBufLen SHR 2
Else
RxBufLen := 64;
GoodBlks := 0;
If GoodNeeded SHL 1 > 16 Then
GoodNeeded := 16
Else
GoodNeeded := GoodNeeded SHL 1;
End;
Status.Position := RxPos;
Status.BlockSize := RxBufLen;
StatusUpdate(False, False);
Break;
End;
ZSKIP : Begin
Close (WrkFile);
ZSendFile := ZSKIP;
Exit;
End;
End;
End {$IFDEF ZDEBUG}Else ZLog('ZSendFile -> Nonsense response: ' + HeaderType(C)) {$ENDIF};
End;
End;
Close (WrkFile);
End;
Procedure TProtocolZmodem.ZEndSender;
Var
TimeOut : LongInt;
Begin
TimeOut := TimerSet(500);
While Not AbortTransfer And Not TimerUp(TimeOut) Do Begin
Client.PurgeInputData;
ZPutLong (0);
ZSendBinaryHeader (ZFIN);
If Not Client.DataWaiting Then
WaitMS(500)
Else
Case ZGetHeader(RxHdr) of
ZFIN: Begin
Client.BufWriteStr('OO');
Client.BufFlush;
Break;
End;
ZCAN,
ZTIMEOUT,
RCDO: Break;
End;
End;
End;
Procedure TProtocolZmodem.ZAckBiBi;
Var
Count : Byte;
Ch : SmallInt;
Begin
{$IFDEF ZDEBUG} ZLog('ZAckBiBi -> begin'); {$ENDIF}
ZPutLong (0);
// Send ZFIN and wait up to 5 seconds for OO
For Count := 1 to 5 Do Begin
If AbortTransfer Then Break;
ZSendHexHeader (ZFIN);
Ch := ReadByteTimeOut(100);
{$IFDEF ZDEBUG} ZLog('ZAckBiBi -> ZFIN response is ' + HeaderType(Ch)); {$ENDIF}
Case Ch of
Ord('O') : Begin
{$IFDEF ZDEBUG} ZLog('ZAckBiBi -> Got ending O'); {$ENDIF}
ReadByteTimeOut(1);
Break;
End;
ZTIMEOUT,
RCDO : Break;
End;
End;
End;
Function TProtocolZmodem.ZInitSender : SmallInt;
Label
Again;
Var
Tmp : SmallInt;
N : SmallInt;
Errors : SmallInt;
Begin
UseCRC32 := True;
Errors := 0;
{$IFDEF ZDEBUG} ZLog('ZInitSender -> begin'); {$ENDIF}
For N := 1 to 10 Do Begin
If AbortTransfer Then Break;
FillChar (TxHdr, SizeOf(TxHdr), 0); // zero out all flags
TxHdr[ZF0] := CANFDX OR CANOVIO OR CANFC32 OR CANBRK;
If EscapeAll Then
TxHdr[ZF0] := TxHdr[ZF0] or ESCALL;
{$IFDEF ZDEBUG} ZLog('ZInitSender -> Sending ZRINIT'); {$ENDIF}
ZSendHexHeader (ZRINIT);
Again:
Tmp := ZGetHeader(RxHdr);
{$IFDEF ZDEBUG} ZLog('ZInitSender -> Got response ' + HeaderType(Tmp)); {$ENDIF}
Case Tmp of
ZRQINIT : Continue;
ZEOF : Continue;
ZTIMEOUT: Continue;
ZFILE : Begin
If ZReceiveData(RxBuf, ZBUFSIZE) = GOTCRCW Then Begin
ZInitSender := ZFILE;
Exit;
End;
ZSendHexHeader (ZNAK);
Goto Again;
End;
ZSINIT : Begin
If ZReceiveData (RxBuf, ZATTNLEN) = GOTCRCW Then Begin
Attn := '';
Tmp := 0;
While RxBuf[Tmp] <> 0 Do Begin
Attn := Attn + Chr(RxBuf[Tmp]);
Inc (Tmp);
End;
ZPutLong (1);
ZSendHexHeader (ZACK);
End Else
ZSendHexHeader (ZNAK);
(*
RxBufLen := (Word(RxHdr[ZP1]) SHL 8) OR RxHdr[ZP0];
UseCrc32 := (RxHdr[ZF0] AND CANFC32) <> 0;
EscapeAll := (RxHdr[ZF0] AND ESCALL) = ESCALL;
{$IFDEF ZDEBUG} ZLog('ZInitSender -> ZSINIT'); {$ENDIF}
{$IFDEF ZDEBUG} ZLog('ZInitSender -> CRC32:' + strI2S(Ord(UseCrc32))); {$ENDIF}
{$IFDEF ZDEBUG} ZLog('ZInitSender -> EscapeAll:' + strI2S(Ord(EscapeAll))); {$ENDIF}
{$IFDEF ZDEBUG} ZLog('ZInitSender -> BlockSize:' + strI2S(RxBufLen)); {$ENDIF}
*)
Goto Again;
End;
ZFREECNT: Begin
ZPutLong (LongInt($FFFFFFFF));
ZSendHexHeader (ZACK);
Goto Again;
End;
ZCOMMAND: Begin
If ZReceiveData (RxBuf, ZBUFSIZE) = GOTCRCW Then Begin
ZPutLong (0);
Repeat
ZSendHexHeader (ZCOMPL);
Inc (Errors);
Until (Errors >= 10) or (ZGetHeader(RxHdr) = ZFIN);
ZAckBiBi;
ZInitSender := ZCOMPL;
Exit;
End Else
ZSendHexHeader (ZNAK);
Goto Again;
End;
ZCOMPL : Continue;
ZFIN : Begin
ZAckBiBi;
ZInitSender := ZCOMPL;
Exit;
End;
RCDO,
ZCAN : Begin
ZInitSender := ZERROR;
Exit;
End;
End;
End;
ZInitSender := ZOK;
End;
Function TProtocolZmodem.ZReceiveData (Var Buf: ZBufType; Len: SmallInt) : SmallInt;
Label
ErrorCRC16,
ErrorCRC32;
Var
C, D : SmallInt;
CRC : SmallInt;
ulCRC : LongInt;
Count : SmallInt;
Begin
RxCount := 0;
{$IFDEF ZDEBUG} ZLog('ZReceiveData -> begin'); {$ENDIF}
If RxFrameIdx = ZBIN32 Then Begin
ulCRC := LongInt($FFFFFFFF);
While (Len >= 0) Do Begin
C := ZDLRead;
If Hi(C) <> 0 Then Begin
ErrorCRC32:
Case C of
GOTCRCE,
GOTCRCG,
GOTCRCQ,
GOTCRCW : Begin
D := C;
ulCRC := Crc32(Lo(C), ulCRC);
For Count := 1 to 4 Do Begin
C := ZDLRead;
If Hi(C) <> 0 Then Goto ErrorCRC32;
ulCRC := Crc32(Lo(C), ulCRC);
End;
If (ulCRC <> LongInt($DEBB20E3)) Then Begin
{$IFDEF ZDEBUG} ZLog('ZReceiveData -> CRC32 error'); {$ENDIF}
Result := ZERROR;
Exit;
End;
{$IFDEF ZDEBUG} ZLog('ZReceiveData -> Successful packet ' + HeaderType(D) + ' size ' + strI2S(RxCount)); {$ENDIF}
Result := D;
Exit;
End;
GOTCAN : Begin
ZReceiveData := ZCAN;
Exit;
End;
Else
{$IFDEF ZDEBUG} ZLog('ZReceiveData -> Got bad frame type? ' + HeaderType(C)); {$ENDIF}
ZReceiveData := C;
Exit;
End;
End;
Buf[RxCount] := Lo(C);
Dec (Len);
Inc (RxCount);
ulCRC := Crc32(Lo(C), ulCRC);
End;
End Else Begin
CRC := 0;
While Len >= 0 Do Begin
C := ZDLRead;
If Hi(C) <> 0 Then Begin
ErrorCRC16:
Case C of
GOTCRCE,
GOTCRCG,
GOTCRCQ,
GOTCRCW : Begin
D := C;
For Count := 1 to 2 Do Begin
CRC := Crc16(Lo(C), CRC);
C := ZDLRead;
If Hi(C) <> 0 Then Goto ErrorCRC16;
End;
CRC := Crc16(Lo(C), CRC);
If CRC <> 0 Then Begin
{$IFDEF ZDEBUG} ZLog('ZReceiveData -> CRC16 error'); {$ENDIF}
ZReceiveData := ZERROR
End Else
ZReceiveData := D;
Exit;
End;
GOTCAN : Begin
ZReceiveData := ZCAN;
Exit;
End;
Else
ZReceiveData := C;
Exit;
End;
Buf[RxCount] := Lo(C);
Inc(RxCount);
Dec(Len);
CRC := Crc16(Lo(C), CRC);
End;
End;
End;
{$IFDEF ZDEBUG} ZLog('ZReceiveData -> Long packet (frameidx=' + HeaderType(RxFrameIdx) + '; rxcount=' + strI2S(RxCount) + ')'); {$ENDIF}
ZReceiveData := ZERROR;
End;
Function TProtocolZmodem.ZReceiveFile : SmallInt;
Label
NextHeader,
MoreData;
Var
Tmp : SmallInt;
FName : String;
FSize : LongInt;
RetryCount : SmallInt;
C : SmallInt;
Begin
{$IFDEF ZDEBUG} ZLog(''); {$ENDIF}
{$IFDEF ZDEBUG} ZLog('ZRecvFile -> begin'); {$ENDIF}
FName := '';
FSize := 0;
RxBytes := 0;
Tmp := 0;
While RxBuf[Tmp] <> 0 Do Begin
FName := FName + Chr(RxBuf[Tmp]);
Inc (Tmp);
End;
// Strip path if exists, and leading/trailing spaces
FName := JustFile(strStripB(FName, ' '));
Inc (Tmp);
While (RxBuf[Tmp] <> $20) and (RxBuf[Tmp] <> 0) Do Begin
FSize := (FSize * 10) + RxBuf[Tmp] - $30;
Inc (Tmp);
End;
{$IFDEF ZDEBUG} ZLog('ZRecvFile -> File:' + FName); {$ENDIF}
{$IFDEF ZDEBUG} ZLog('ZRecvFile -> Size:' + strI2S(FSize)); {$ENDIF}
Client.PurgeInputData;
Queue.Add(ReceivePath, FName);
Queue.QData[Queue.QSize]^.FileSize := FSize;
Queue.QData[Queue.QSize]^.Status := QueueIntransit;
Assign (WrkFile, ReceivePath + FName);
{$I-} Reset (WrkFile, 1); {$I+}
If IoResult = 0 Then Begin
If FSize = FileSize(WrkFile) Then Begin
// Same size file, SKIP it
Close (WrkFile);
Queue.QData[Queue.QSize]^.Status := QueueSkipped;
ZSendHexHeader (ZSKIP);
ZReceiveFile := ZEOF;
Exit;
End Else
If FileSize(WrkFile) < FSize Then Begin
// Resume transfer
RxBytes := FileSize(WrkFile);
Seek (WrkFile, RxBytes);
End Else Begin
// If adding rename/overwrite support do it either
// but for now we just ZSKIP
Close (WrkFile);
Queue.QData[Queue.QSize]^.Status := QueueSkipped;
ZSendHexHeader (ZSKIP);
ZReceiveFile := ZEOF;
Exit;
End;
End Else Begin
{$I-} ReWrite (WrkFile, 1); {$I+}
If IoResult <> 0 Then Begin
ZSendHexHeader (ZSKIP);
ZReceiveFile := ZEOF;
Exit;
End;
End;
{$IFDEF ZDEBUG} ZLog('ZRecvFile -> Begin data'); {$ENDIF}
Status.FilePath := ReceivePath;
Status.FileName := FName;
Status.FileSize := FSize;
Status.BlockSize := 0;
Status.Position := RxBytes;
Status.StartTime := TimerSeconds;
StatusUpdate(False, False);
RetryCount := 25;
Queue.QData[Queue.QSize]^.Status := QueueFailed;
StatusTimer := TimerSet(StatusCheck);
While Not EndTransfer Do Begin
{$IFDEF ZDEBUG} ZLog('ZRecvFile -> Sending ZRPOS ' + strI2S(RxBytes)); {$ENDIF}
ZPutLong (RxBytes);
ZSendBinaryHeader (ZRPOS);
NextHeader:
C := ZGetHeader(RxHdr);
{$IFDEF ZDEBUG} ZLog('ZRecvFile -> NextHeader -> Got ' + HeaderType(C)); {$ENDIF}
Case C of
ZNAK,
ZTIMEOUT: Begin
Dec (RetryCount);
If RetryCount < 0 Then Begin
Close (WrkFile);
ZReceiveFile := ZERROR;
Exit;
End;
End;
ZFILE : Begin
ZReceiveData (RxBuf, ZBUFSIZE);
Continue;
End;
ZEOF : Begin
If ZGetLong(RxHdr) <> RxBytes Then Continue;
Status.Position := RxBytes;
Status.BlockSize := RxCount;
StatusUpdate(False, False);
Close (WrkFile);
Queue.QData[Queue.QSize]^.Status := QueueSuccess;
ZReceiveFile := C;
Exit;
End;
ZERROR : Begin
Dec (RetryCount);
If RetryCount < 0 Then Begin
Close (WrkFile);
ZReceiveFile := ZERROR;
Exit;
End;
Client.BufWriteStr(Attn);
Client.BufFlush;
Continue;
End;
ZDATA : Begin
If ZGetLong(RxHdr) <> RxBytes Then Begin
{$IFDEF ZDEBUG} ZLog('ZRecvFile -> NextHeader -> ZDATA -> Size not ' + strI2S(RxBytes)); {$ENDIF}
Dec(RetryCount);
If RetryCount < 0 Then Begin
Close (WrkFile);
ZReceiveFile := ZERROR;
Exit;
End;
Client.BufWriteStr(Attn);
Client.BufFlush;
Continue;
End;
MoreData:
If TimerUp(StatusTimer) Then Begin
If AbortTransfer Then Break;
StatusUpdate(False, False);
StatusTimer := TimerSet(StatusCheck);
End;
C := ZReceiveData(RxBuf, ZBUFSIZE);
{$IFDEF ZDEBUG} ZLog('ZRecvFile -> MoreData -> Got ' + HeaderType(C) + ' want data packet'); {$ENDIF}
Case C of { we can combine zreceivedata and case here }
ZCAN : Begin
Close (WrkFile);
ZReceiveFile := ZERROR;
Exit;
End;
ZERROR : Begin
Dec(RetryCount);
If RetryCount < 0 Then Begin
Close (WrkFile);
ZReceiveFile := ZERROR;
Exit;
End;
Client.BufWriteStr(Attn);
Client.BufFlush;
End;
ZTIMEOUT: Begin
Dec(RetryCount);
If RetryCount < 0 Then Begin
Close (WrkFile);
ZReceiveFile := ZERROR;
Exit;
End;
Continue;
End;
GOTCRCW : Begin
RetryCount := 25;
BlockWrite (WrkFile, RxBuf, RxCount);
RxBytes := RxBytes + RxCount;
ZPutLong (RxBytes);
ZSendBinaryHeader (ZACK);
Status.Position := RxBytes;
Status.BlockSize := RxCount;
Goto NextHeader;
End;
GOTCRCQ : Begin
RetryCount := 25;
BlockWrite (WrkFile, RxBuf, RxCount);
RxBytes := RxBytes + RxCount;
ZPutLong (RxBytes);
ZSendBinaryHeader (ZACK);
Status.Position := RxBytes;
Status.BlockSize := RxCount;
Goto MoreData;
End;
GOTCRCG : Begin
RetryCount := 25;
BlockWrite (WrkFile, RxBuf, RxCount);
Rxbytes := RxBytes + RxCount;
Status.Position := RxBytes;
Status.BlockSize := RxCount;
Goto MoreData;
End;
GOTCRCE : Begin
RetryCount := 25;
BlockWrite (WrkFile, RxBuf, RxCount);
RxBytes := RxBytes + RxCount;
Status.Position := RxBytes;
Status.BlockSize := RxCount;
Goto NextHeader;
End;
End;
End;
End;
End;
Close (WrkFile);
ZReceiveFile := ZERROR;
End;
Procedure TProtocolZmodem.DoAbortSequence;
Begin
If Not Connected Then Exit;
Client.PurgeInputData;
Client.PurgeOutputData;
Client.BufWriteStr(Attn);
Client.BufWriteStr(CancelStr);
Client.BufFlush;
End;
Procedure TProtocolZmodem.QueueReceive;
Begin
Status.Sender := False;
StatusUpdate(True, False);
RxBufLen := ZBufSize;
While Not AbortTransfer Do Begin
If ZInitSender = ZFILE Then Begin
If ZReceiveFile <> ZEOF Then Break;
End Else
Break;
End;
If AbortTransfer Then DoAbortSequence;
StatusUpdate(False, True);
End;
Procedure TProtocolZmodem.QueueSend;
Begin
Status.Sender := True;
StatusUpdate (True, False);
Queue.QPos := 0;
While Queue.Next And Not AbortTransfer Do Begin
If Queue.QPos = 1 Then
If ZInitReceiver <> ZOK Then Break;
Case ZSendFile of
ZOK : Queue.QData[Queue.QPos]^.Status := QueueSuccess;
ZSKIP : Queue.QData[Queue.QPos]^.Status := QueueSkipped;
ZERROR : Queue.QData[Queue.QPos]^.Status := QueueFailed;
End;
End;
If AbortTransfer Then
DoAbortSequence
Else
ZEndSender;
StatusUpdate(False, True);
End;
End.
Reference in New Issue View Git Blame Copy Permalink